German-based Thyssen Krupp Nirosta manufactured the Austenite 55 stainless steel, made from 80 percent recycled content.
The project features 9,450 square feet of Berridge Manufacturing, San Antonio, Cee-Lock Standing Seam Roof System and 2,420 square feet of...
MetalWorks RH200 Custom Curved ceiling system in white from Armstrong Ceiling Systems, Lancaster, Pa., was used.
Eufaula, Ala.-based American Buildings Co. manufactured the metal building and the 13,500-square-foot Standing Seam II roof.
The 125,000-square-foot (11613-m2) building contains offi ce space, training rooms, a food-service area, call center and data center.
Diamond Tiles provided a strong textured element to the 3,000-square-foot (279-m2) building.
Metal dressed up the parking garage, which occupies the first two levels of the 88,000-square-foot (8175-m2) office building.
Snowshoe is a year-round mountain resort comprised of mixeduse condominium buildings atop of Snowshoe Mountain. Each condominium is based...
The shopping complex is only 2 miles (3.2 km) away from the ocean, so corrosion resistance was a top priority when selecting a cladding...
This 25-story, 195,000-square-foot (18116-m2) residential condominium and retail tower is located in the Times Square district.
The church, which dates back to the early 1900s, chose Met-Tile for its roof because the company’s products have a clay tile, oldworld...
Millennium Tiles LLC, Elkhorn, Wis., manufactured the 6,000 square feet (557 m2) of golden, stainless-steel dome atop the church.
The sleek metal façade of the Wayne L. Morse United States Courthouse in Eugene, Ore. portrays both elegance and strength.
Antique bronze Behlen ADP-2 panels and 10-foot (3-m) masonry wainscot were used for the exterior walls of the 35,000-square-foot (3252-m2)...
Petersen Aluminum, Elk Grove Village, Ill., manufactured 16,000 square feet (1486 m2) of PAC-CLAD Snap-Clad roofing panels, snap-on batten...
McNichols Co., Tampa, Fla., manufactured approximately 1,000 square feet (93 m2) of panels in varying sizes.
About 90,000 square feet (8361 m2) of Lancaster, Pa.-based Fabral Standing Seam metal roof tops the building.
Michigan City, Ind.-based Kalzip manufactured TitanSilver for the facility’s roof.
About 50,000 square feet of PAC-CLAD 24-gauge Snap-Clad panels finished in award blue was used from Petersen Aluminum Corp.
ALPOLIC Materials, Chesapeake, Va., manufactured 5,260 square feet of 4-mm-thick silver metallic ACM panels that were used for the canopies...
CENTRIA, Moon Township, Pa., manufactured the metal for the project.
The roof used 900 square feet (84 m2) of 0.032 aluminum Curved PC Panel in medium bronze from ATAS International Inc., Allentown, Pa.
The project used approximately 19,400 square feet (1802 m2) of Ontario, Calif.
The large-scale, flexible, open weaves of the mesh allow for natural daylighting while shading and screening the parking structure...
Because of the compounding multiple angles of the canopy construction, each perforated ceiling panel had to be custom fabricated in tapered...
One oil giant is hoping to make the consumer experience at the gas pump a little greener by incorporating eco-friendly design and materials.
By using metal, a highly recycled and recyclable material, it was possible to take an inherently green idea to the next level.
Consol Energy's roots are in coal. The company has been mining coal since 1864 and is a leader in the production of coal-bed methane gas and high-Btu bituminous coal.
